Analog sensor converter, based on the non-contact principle. Form a linear output signal, current or voltage, which is proportional to the aiming distance and is linear over the entire working range.
High precision and repeatability, compact, robust and reliable construction.
Uses: Used for position control of metal objects, measurement of deviation and swing, control of wear surfaces, etc.
Non-flush | Detection distance | 10mm | ||
DC6-36V | NPN | NO | 3010NA | |
NC | 3010NB | |||
NO+NC | 3010NC | |||
PNP | NO | 3010PA | ||
NC | 3010PB | |||
NO+NC | 3010PC | |||
Two wire system | NO | 3010LA | ||
NC | 3010LB | |||
AC90-250V | SRC Control label silicon | NO | 2010A | |
NC | 2010B | |||
NO+NC | 2010C | |||
Relay output | ||||
Control output | DC | 200mA | ||
SCR/Relay | 300mA | |||
Output voltage drop DC/AC | DC<3V AC<10mA | |||
Consumption current | DC<15mA AC<10mA | |||
Standard detected object | 15*15*1(A3 Iron) | |||
Repeat precision | 0.02 | |||
DC/AC Response frequency | 300HZ/25HZ | |||
Working environment temperature | below 25°C to 75°C | |||
Insulation resistance | ≥50MΩ | |||
Shell meterial | Metal | |||
Protection grade | IEC standard IP67 | |||
Altemative model at home and abroad | LJ36A3 |
Miniature Circuit Breakers (MCB)
Behind all these dream lives, the maintenance of electric energy is inseparable, which increases the...
Date:2023/04/048 differences between DC contactors and AC contactors and precautions for use
In the automatic control system, there is a very important component, which is the contactor. Its fu...
Date:2023/02/28