CLS 028
Small, compact designQuiet operationHeating power adjusts to ambient temperatureDin rail or screw mount available The CLS 028 FAN HEATER prevents formation of condensation and provides and evenly distributed interior air temperature in enclosures. The heater is connected using the internal terminal connectors. The surface temperatures on the accessible side surfaces of the housing are minimized as […]
Small, compact design
Quiet operation
Heating power adjusts to ambient temperature
Din rail or screw mount available
The CLS 028 FAN HEATER prevents formation of condensation and provides and evenly distributed interior air temperature in enclosures. The heater is connected using the internal terminal connectors. The surface temperatures on the accessible side surfaces of the housing are minimized as a result of the heater design. The CSL 028’s small size make it ideal for use in enclosures where space is at a premium.
Technical data
| Heating element | PTC resistor – temperature limiting |
| Surface temperature | 150W/250W: max. 50°C (122°F), except upper protective grille |
| 400W: max. 65°C (149°F), except upper protective grille | |
| at 20°C (68°F) ambient temperature | |
| Axial fan, ball bearing | air flow, free flow: |
| CS 028: 13.8m3/h | |
| CSL 028: 45m3/h (230VAC), 54m3/h (120VAC) | |
| service life 40,000h at 40°C (104°F) | |
| Connection | 2-pole clamp max. 2.5mm2 (CSL 028 with strain relief), |
| clamping screw torque 0.8Nm max. | |
| Casing | plastic according to UL94-0, black |
| Mounting | clip for 35 mm DIN rail, EN 60715 or screw fixing (? 5.3mm) |
| Fitting position | vertical airflow (air outlet up) |
| Operating/Storage temperature | -45 to +70°C (-49 to +158°F) |
| Operating/Storage humidity | max. 90% RH (non-condensing) |
| Protection type/Protection class | IP20 / II (double insulated) |
| Approvals | |
| Note | other voltages on request |
| Art. No. clip fixing | Art. No. screw fixing | Series | Operating voltage | Heating capacity* | Inrush current max. | Pre-fuse T (time-delay) | Dimensions (H x W x D) | Weight (approx.) |
| 02800.0-00 | 02800.0-01 | CS 028 | 230VAC, 50/60Hz | 150W | 12A | 6.3A | 75 x 65 x 90mm | 0.3kg |
| 02811.0-00 | 02811.0-01 | CSL 028 | 230VAC, 50/60Hz | 250W | 9A | 6.3A | 90 x 85 x 111mm | 0.5kg |
| 02810.0-00 | 02810.0-01 | CSL 028 | 230VAC, 50/60Hz | 400W | 15A | 10A | 90 x 85 x 111mm | 0.5kg |
| 02800.9-00 | 02800.9-01 | CS 028 | 120VAC, 50/60Hz | 150W | 6A | 6.3A | 75 x 65 x 90mm | 0.3kg |
| 02811.9-00 | 02811.9-01 | CSL 028 | 120VAC, 50/60Hz | 250W | 6A | 6.3A | 90 x 85 x 111mm | 0.5kg |
| 02810.9-00 | 02810.9-01 | CSL 028 | 120VAC, 50/60Hz | 400W | 9A | 6.3A | 90 x 85 x 111mm | 0.5kg |
at 20°C (68°F) ambient temperature
-
Molded Case Circuit Breakers Supplier
Company Profile Yueqing Kangpa Electric Co., Ltd. was established in 2009, covering an a...
Date:2025-06-18 -
Do Smart Circuit Breakers Have Overload and Short Circuit Protection?
Quick Answer Yes, a smart circuit breaker can have overload protection and short circuit prot...
Date:2026-06-01
Why Is Short-Circuit Coordination Important in a Motor Starter?
A motor starter does more than switch a motor on and off. It must also protect the motor circuit when...
Date: 2026/06/11
Circuit Breaker vs Contactor vs Overload Relay: What Is the Difference?
Quick Answer A circuit breaker, contactor, and overload relay are often installed together in a motor control circuit, but they...
Date: 2026/06/09
What Wire Size Mistakes Can Make a 60 Amp Breaker Unsafe?
Quick Answer A 60 amp breaker wire size should not be selected from the breaker rating alone. Although 6 AWG copper...
Date: 2026/06/08
What Is the Purpose of a Miniature Circuit Breaker in a Low-Voltage Electrical System?
Quick Answer The main purpose of a Miniature Circuit Breaker is to protect low-voltage electrical wiring and circuits against excessive current...
Date: 2026/06/05
Why Is MCB Protection Not Only About Rated Current?
Quick Answer MCB protection is not only about rated current because an MCB must protect the whole circuit, not just...
Date: 2026/06/03