Features
Pressure clamp connectors
Dynamic heating up
Wide voltage range
Energy saving
Clip fixing
Quick installation
Description
These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature may not fall below a minimum value. The aluminum profile heater body design has a chimney effect and distributes the heat evenly. The pressure clamp connectors save time and simplify installation.
Technical Data
| Operating voltage | 120-240V AC/DC* (min. 110V, max. 265V) |
| Heating element | PTC resistor – temperature limiting |
| Heater body | extruded aluminum profile, anodized |
| Connection | 3 pressure clamps for stranded wire 0.5-1.5mm2 (with wire end ferrule) |
| and rigid wire 0.5- 2.5mm2 | |
| Connection casing | plastic according to UL94 V-0, black |
| Mounting | clip for 35mm DIN rail, EN 60715 |
| Fitting position | vertical airflow (air outlet up, connection on bottom) |
| Operating/Storage temperature | -45 to +70°C (-49 to +158°F) |
| Operating/Storage humidity | max. 90% RH (non-condensing) |
| Protection type/Protection class | IP20 / I (earthed) |
| Note | other voltages on request |
Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.
| Art. No. | Heating capacity* | Inrush current max. | Pre-fuse T (time-delay) | Length (L) | Weight (approx.) |
| 14000.0-00 | 15W | 1.5A | 1A | 65mm | 0.3kg |
| 14001.0-00 | 30W | 3.0A | 2.5A | 65mm | 0.3kg |
| 14003.0-00 | 45W | 3.5A | 2.5A | 65mm | 0.3kg |
| 14005.0-00 | 60W | 2.5A | 2.5A | 140mm | 0.4kg |
| 14006.0-00 | 75W | 4.0A | 4A | 140mm | 0.5kg |
| 14007.0-00 | 100W | 4.5A | 4A | 140mm | 0.5kg |
| 14008.0-00 | 150W | 9.0A | 6.3A | 220mm | 0.7kg |
*At 20°(68°F) ambient temperature
-
How to Tell If a Circuit Breaker Is Bad and When Should You Replace It？
Introduction It usually starts with something small. A breaker trips once. You reset it. I...
Date:2026-03-03 -
How Motor Circuit Breakers Protect Modern Motor Systems？ 5 Critical Questions Answered
Introduction A Motor Circuit Breaker plays a crucial role in ensuring the safe and stable ope...
Date:2025-12-01
Why Is Short-Circuit Coordination Important in a Motor Starter?
A motor starter does more than switch a motor on and off. It must also protect the motor circuit when...
Date: 2026/06/11
Circuit Breaker vs Contactor vs Overload Relay: What Is the Difference?
Quick Answer A circuit breaker, contactor, and overload relay are often installed together in a motor control circuit, but they...
Date: 2026/06/09
What Wire Size Mistakes Can Make a 60 Amp Breaker Unsafe?
Quick Answer A 60 amp breaker wire size should not be selected from the breaker rating alone. Although 6 AWG copper...
Date: 2026/06/08
What Is the Purpose of a Miniature Circuit Breaker in a Low-Voltage Electrical System?
Quick Answer The main purpose of a Miniature Circuit Breaker is to protect low-voltage electrical wiring and circuits against excessive current...
Date: 2026/06/05
Why Is MCB Protection Not Only About Rated Current?
Quick Answer MCB protection is not only about rated current because an MCB must protect the whole circuit, not just...
Date: 2026/06/03