HGK047
Operating with voltages below 140V AC/DC reduces heating performance by approx.10%Dynamic heating upEnergy savingWide voltage rangeTemperature limitingClip fixing Technical Data: Heating element PTC resistor, temperature limiting Heater body extruded aluminum profile, anodized Mounting clip for 35mm DIN rail, EN 60715 Fitting position vertical airflow (air outlet up, connection on bottom) Operating/Storage temperature -45 to +70 °C (-49 to +158 °F) Operating / Storage humidity max. 90 % RH (non-condensing) Protection type/Protection class IP54/ I (earthed) Accessories screw fixing, Art. No. 09024.0-00 (1 packing unit = 2 pieces) Note other voltages on request Art. No. Operating voltage Heating Inrush Length (L) Weight (approx.) Connection capacity1 current max. […]
Operating with voltages below 140V AC/DC reduces heating performance by approx.10%
Dynamic heating up
Energy saving
Wide voltage range
Temperature limiting
Clip fixing
Technical Data:
| Heating element | PTC resistor, temperature limiting |
| Heater body | extruded aluminum profile, anodized |
| Mounting | clip for 35mm DIN rail, EN 60715 |
| Fitting position | vertical airflow (air outlet up, connection on bottom) |
| Operating/Storage temperature | -45 to +70 °C (-49 to +158 °F) |
| Operating / Storage humidity | max. 90 % RH (non-condensing) |
| Protection type/Protection class | IP54/ I (earthed) |
| Accessories | screw fixing, Art. No. 09024.0-00 (1 packing unit = 2 pieces) |
| Note | other voltages on request |
| Art. No. | Operating voltage | Heating | Inrush | Length (L) | Weight (approx.) | Connection |
| capacity1 | current max. | |||||
| 04700.0-00 | 120-240V AC/DC2 | 10W | 1.0A | 52mm | 0.1kg | 3 x 0,5mm2 x 300mm cable (silicone) |
| 04701.0-00 | 120-240V AC/DC2 | 20W | 2.5A | 60mm | 0.2kg | 3 x 0,5mm2 x 300mm cable (silicone) |
| 04702.0-00 | 120-240V AC/DC2 | 30W | 3.0A | 70mm | 0.2kg | 3 x 0,5mm2 x 300mm cable (silicone) |
| 04700.9-00 | 110-120 V AC/DC | 10W | 1.0A | 52mm | 0.1kg | 3 x AWG 20 x 300mm cable |
| 04701.9-00 | 110-120 V AC/DC | 20W | 1.5A | 70mm | 0.2kg | 3 x AWG 20 x 300mm cable |
| 04702.9-00 | 110-120 V AC/DC | 30W | 1.5A | 100mm | 0.2kg | 3 x AWG 20 x 300mm cable |
1at 20°C ( 68°F) ambient temperature
2(min. 110V, max 265V) Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.
-
Why Are Air Circuit Breakers Essential for Reliable Data Center Power Systems? 5 Questions Answered
In today's world of high-demand power usage, ensuring reliable and uninterrupted electricity has...
Date:2025-08-18 -
Introduction In modern motor-driven systems, stable and predictable operation depends not onl...
Date:2025-12-18
Why Is Short-Circuit Coordination Important in a Motor Starter?
A motor starter does more than switch a motor on and off. It must also protect the motor circuit when...
Date: 2026/06/11
Circuit Breaker vs Contactor vs Overload Relay: What Is the Difference?
Quick Answer A circuit breaker, contactor, and overload relay are often installed together in a motor control circuit, but they...
Date: 2026/06/09
What Wire Size Mistakes Can Make a 60 Amp Breaker Unsafe?
Quick Answer A 60 amp breaker wire size should not be selected from the breaker rating alone. Although 6 AWG copper...
Date: 2026/06/08
What Is the Purpose of a Miniature Circuit Breaker in a Low-Voltage Electrical System?
Quick Answer The main purpose of a Miniature Circuit Breaker is to protect low-voltage electrical wiring and circuits against excessive current...
Date: 2026/06/05
Why Is MCB Protection Not Only About Rated Current?
Quick Answer MCB protection is not only about rated current because an MCB must protect the whole circuit, not just...
Date: 2026/06/03