Isolator Switch L7S 1P
Characteristics 1.Number of poles:1P, 2P,3P,4P2.Rated Current(A):16,25,40,63,80,1003.Rated Voltage(V):AC230/240,400/415(4P)4.Frequency:50/60Hz5.Protection degree:IP20 Model Isolation Switch Code KP-L7S Standard IEC60947-3 Electrical Features Rated current A 32,40,50,63,80,100,125 Poles P 1P,2P,3P,4P Rated voltage V 240/415 Rated short-time withstand current lcw 12le, 1s Insulation voltage V 500 Rated making and breaking capacity 3le, 1.05Ue, cosφ=0.65 Rated short circuit making capacity 20le, […]
Characteristics
1.Number of poles:1P, 2P,3P,4P
2.Rated Current(A):16,25,40,63,80,100
3.Rated Voltage(V):AC230/240,400/415(4P)
4.Frequency:50/60Hz
5.Protection degree:IP20
| Model | Isolation Switch | ||
| Code | KP-L7S | ||
| Standard | IEC60947-3 | ||
| Electrical Features | Rated current | A | 32,40,50,63,80,100,125 |
| Poles | P | 1P,2P,3P,4P | |
| Rated voltage | V | 240/415 | |
| Rated short-time withstand current lcw | 12le, 1s | ||
| Insulation voltage | V | 500 | |
| Rated making and breaking capacity | 3le, 1.05Ue, cosφ=0.65 | ||
| Rated short circuit making capacity | 20le, t=0.1s | ||
| Rated frequency | Hz | 50/60 | |
| Pollution degree | 2 | ||
| Utilization category | AC-22A | ||
| MechanicalFeatures | Electrical life | t | 1500 |
| Mechanical life | t | 8500 | |
| Protection degree | IP20 | ||
| Ambient temperature (with daily average≤35℃) | ℃ | -5℃…+40℃ | |
| Storage temperature | ℃ | -25℃…+70℃ | |
| Installation | Terminal connection type | Cable/Pin-type bus bar | |
| Terminal size top/bottom for cable | mm2 | 50 | |
| Terminal size top/bottom for bus bar | mm2 | 50 | |
| Tightening torque | N*m | 2.5 | |
| Connection | From top and bottom | ||
-
How Do Air Circuit Breakers Improve Safety and Efficiency in Industrial Automation Systems?
Introduction In the fast-paced world of industrial automation, electrical safety and operatio...
Date:2025-11-12 -
What Defines a Reliable Industrial Power System?
In industrial facilities, electrical power is not just a utility—it is the backbone of continuou...
Date:2026-01-21
Why Is Short-Circuit Coordination Important in a Motor Starter?
A motor starter does more than switch a motor on and off. It must also protect the motor circuit when...
Date: 2026/06/11
Circuit Breaker vs Contactor vs Overload Relay: What Is the Difference?
Quick Answer A circuit breaker, contactor, and overload relay are often installed together in a motor control circuit, but they...
Date: 2026/06/09
What Wire Size Mistakes Can Make a 60 Amp Breaker Unsafe?
Quick Answer A 60 amp breaker wire size should not be selected from the breaker rating alone. Although 6 AWG copper...
Date: 2026/06/08
What Is the Purpose of a Miniature Circuit Breaker in a Low-Voltage Electrical System?
Quick Answer The main purpose of a Miniature Circuit Breaker is to protect low-voltage electrical wiring and circuits against excessive current...
Date: 2026/06/05
Why Is MCB Protection Not Only About Rated Current?
Quick Answer MCB protection is not only about rated current because an MCB must protect the whole circuit, not just...
Date: 2026/06/03