Our SSR use power semiconductor devices such as thyristors and transistors, to switch currents up to around a hundred amperes.
Single phase SSR, Single phase solid state relay
SSR-10DA to SSR-120DA
Specification
| Input Voltage | 3-32V DC |
| Load | 24-480VAC 50-60HZ |
| Rated current | 10A-120A |
| Control type | Zero-Cross switch |
| On-Off time | ≤10MS |
| Electrical life | ≥100,000,0times |
| Work temperature | -20 to 85C |
| Medium pressure | 2500V |
| Dimenstions | 58*30*45mm(includ shell) |
-
Replacing a Circuit Breaker Switch: Signs, Safety, and Smart Choices
Last Friday, what should have been a relaxing family movie night came to an abrupt stop—again. R...
Date:2026-01-30 -
How to Tell If a Circuit Breaker Is Bad and When Should You Replace It？
Introduction It usually starts with something small. A breaker trips once. You reset it. I...
Date:2026-03-03
Why Is Short-Circuit Coordination Important in a Motor Starter?
A motor starter does more than switch a motor on and off. It must also protect the motor circuit when...
Date: 2026/06/11
Circuit Breaker vs Contactor vs Overload Relay: What Is the Difference?
Quick Answer A circuit breaker, contactor, and overload relay are often installed together in a motor control circuit, but they...
Date: 2026/06/09
What Wire Size Mistakes Can Make a 60 Amp Breaker Unsafe?
Quick Answer A 60 amp breaker wire size should not be selected from the breaker rating alone. Although 6 AWG copper...
Date: 2026/06/08
What Is the Purpose of a Miniature Circuit Breaker in a Low-Voltage Electrical System?
Quick Answer The main purpose of a Miniature Circuit Breaker is to protect low-voltage electrical wiring and circuits against excessive current...
Date: 2026/06/05
Why Is MCB Protection Not Only About Rated Current?
Quick Answer MCB protection is not only about rated current because an MCB must protect the whole circuit, not just...
Date: 2026/06/03