Voltage Protector AVP63A
Description1、Circuit will be cut off for overvoltage and undervoltage of the single phase circuit. It will automatic reset the connectingcircuit after the voltage recovery of single-phase circuit and delay of time without manual operation.2、Circuit protection will produce no malfunction ofr transient of temporary overvoltage, which can avoid voltage instability.3、Protection device will not be damaged for […]
Description
1、Circuit will be cut off for overvoltage and undervoltage of the single phase circuit. It will automatic reset the connecting
circuit after the voltage recovery of single-phase circuit and delay of time without manual operation.
2、Circuit protection will produce no malfunction ofr transient of temporary overvoltage, which can avoid voltage instability.
3、Protection device will not be damaged for circuit disconnection of protection device or sudden power recovery after sudden power
failure carused by weak jonits.
4、Protection deveice will not be damaged for the maximum overvoltage of circuit fault
Specification
Rated voltage ：230V
Rated frequency：50/60Hz
Rate current：1A-100A adjustable (default 63A)
Under-voltge action cut-off value: 100V-210V adjustable(defait 170V)
over-voltage action cut-off value: 230V-300V adjustable (default 270V)
Power recovery delay after power failure:5s
Range of time delay: 1s-300s adjustable (default 30s)
Electrical machinery life-span:minimum 50000 times
Exterior dimension:82x35x65mm
Overvoltge and undervoltage restore value is 5V of the set value and overcurrent restore value is 1A less than set value
Rated limit overcurrent：40,63A,80A,100A
| Model number | AVP-63 / AVP-40 |
| Rated voltage | 220VAC 50HZ or 120VAC 50HZ |
| Rated current | 1A-40A adjustable(40A) 1A-63A adjustable（63A ） |
| Over-voltage action cut-off value | 240V-300V adjustable（default 270V ）130-160V adjustable（default 160V ) |
| Under-voltge action cut-off value | 140-210V adjustable（default 170V ） 70-110V adjustable（default 90V ) |
| Overcurrent action cut -off value | 63A 1A-63A can be set (default 63A) 40A: 1A-40A can be set (default 40A) |
| Boot delay time | 1s-600s adjustable(defauIt 5s) |
| Own Power consumption | ≤2W |
| Electrical mechanical life | ≥100,000 times |
| Working environment | Temperature: -5⁰C～+40⁰C Humidity:＜90% Altitude：≤2000 m |
-
How to Choose an MCB? A Step-by-Step Guide
In low-voltage electrical systems, an MCB is one of the most common protective devices, but it i...
Date:2026-04-22 -
How to Select MCCB for Industrial Power Distribution
Quick Answer Selecting the right MCCB (Molded Case Circuit Breakers) for industrial power dis...
Date:2026-04-15
Why Is Short-Circuit Coordination Important in a Motor Starter?
A motor starter does more than switch a motor on and off. It must also protect the motor circuit when...
Date: 2026/06/11
Circuit Breaker vs Contactor vs Overload Relay: What Is the Difference?
Quick Answer A circuit breaker, contactor, and overload relay are often installed together in a motor control circuit, but they...
Date: 2026/06/09
What Wire Size Mistakes Can Make a 60 Amp Breaker Unsafe?
Quick Answer A 60 amp breaker wire size should not be selected from the breaker rating alone. Although 6 AWG copper...
Date: 2026/06/08
What Is the Purpose of a Miniature Circuit Breaker in a Low-Voltage Electrical System?
Quick Answer The main purpose of a Miniature Circuit Breaker is to protect low-voltage electrical wiring and circuits against excessive current...
Date: 2026/06/05
Why Is MCB Protection Not Only About Rated Current?
Quick Answer MCB protection is not only about rated current because an MCB must protect the whole circuit, not just...
Date: 2026/06/03