KTO011
Thermostat (NC): Thermostat opens on temperature rise – for regulating heaters or for switching signal devices. Comes with red temperature dial. This adjustable mechanical thermostat is designed for electrical cabinets and industrial enclosures, featuring a 0–60°C control range. The intuitive rotary dial lets you set your target temperature quickly, automatically triggering heaters or cooling fans […]
Thermostat (NC): Thermostat opens on temperature rise – for regulating heaters or for switching signal devices. Comes with red temperature dial.
This adjustable mechanical thermostat is designed for electrical cabinets and industrial enclosures, featuring a 0–60°C control range. The intuitive rotary dial lets you set your target temperature quickly, automatically triggering heaters or cooling fans to prevent overheating and condensation, protecting electrical components from temperature-related damage. With a flame-retardant, rugged housing and snap-in DIN rail mount for tool-free installation, it is a reliable solution for temperature control in control panels and industrial equipment.
Bullet Points
Wide Temperature Range: 0–60°C adjustable range for versatile heating/cooling control
Simple Manual Operation: Rotary dial for quick, precise temperature setpoint adjustment
Maintenance-Free Design: No external power required for basic control
Rugged Construction: Flame-retardant plastic housing built for industrial environments
Quick Installation: Snap-in DIN rail mount, no extra tools needed
Dual Functionality: Works with both heaters and cooling fans to prevent overheating or condensation
Technical Date
| Switch temperature | 7K (± 4K tolerance) |
| difference | |
| Sensor element | thermostatic bimetal |
| Contact type | snap-action contact |
| Contact resistance | < 10mO |
| Service life | > 100 000 cycles |
| Max. switching capacity | 250VAC, 10 (2) A ,120VAC, 15 (2) A |
| DC 30W | |
| EMC | acc. to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3 |
| Connection | 2-pole terminal, clamping torque 0.5Nm max.: rigid wire 2.5mm2, stranded wire (with wire end ferrule) 1.5mm2 |
| Mounting | clip for 35mm DIN rail, EN50022 (or for exit filter EF 118 Series) |
| Casing | plastic according to UL94-HB, black |
| Dimensions | 60 x 33 x 43mm |
| Weight | approx. 40g |
| Fitting position | variable |
| Operarting/Storage temperature | -45 to +80°C (-49 to +176°F) |
| Protection type | IP20 |
Product Size
Wiring diagram
-
1 Pole vs 2 Pole Circuit Breaker: What’s the Real Difference?
You’re standing in front of your electrical panel during a renovation project. The drywall is op...
Date:2026-02-25 -
Molded Case Circuit Breakers Manufacturer
Company Profile Yueqing Kangpa Electric Co., Ltd. was established in 2009, covering an a...
Date:2025-06-18
Why Is Short-Circuit Coordination Important in a Motor Starter?
A motor starter does more than switch a motor on and off. It must also protect the motor circuit when...
Date: 2026/06/11
Circuit Breaker vs Contactor vs Overload Relay: What Is the Difference?
Quick Answer A circuit breaker, contactor, and overload relay are often installed together in a motor control circuit, but they...
Date: 2026/06/09
What Wire Size Mistakes Can Make a 60 Amp Breaker Unsafe?
Quick Answer A 60 amp breaker wire size should not be selected from the breaker rating alone. Although 6 AWG copper...
Date: 2026/06/08
What Is the Purpose of a Miniature Circuit Breaker in a Low-Voltage Electrical System?
Quick Answer The main purpose of a Miniature Circuit Breaker is to protect low-voltage electrical wiring and circuits against excessive current...
Date: 2026/06/05
Why Is MCB Protection Not Only About Rated Current?
Quick Answer MCB protection is not only about rated current because an MCB must protect the whole circuit, not just...
Date: 2026/06/03