Type: DC-AC
| Load current: | 10A,25A,40A,60A,80A,90A,100A,120A,200A |
| Load voltage: | 380VAC |
| Control voltage： | 3-32VDC |
| Control current: | 10-68mA |
| On voltage drop: | ≤1.8V |
| On leakage current: | ≤10mA |
| Off response time: | ≤10mS |
| Dielectric strength: | 2500VAC |
| Insylation resistance: | 1000MΩ500VDC |
| Ambient temperature: | ‘-25~+70℃ |
| Insuallation Method: | Screw |
| Indicator: | LED |
| Weight: | 450g |
Remark:
*When the load current is more than 10A,pls use the solid state radiator.
*When there is perceptual load, usually the varistor is needed to connected onto the output.
*To prevent the load short circuit and damage the relay,the fast fuse is needed to connected onto the output circuit.
-
Why Are Motor Circuit Breakers Essential for Reliable Pump and Industrial Applications?
Introduction In modern industrial environments, reliable motor protection is not just a techn...
Date:2025-09-23 -
How Does an MCB Circuit Breaker Work?
Quick Answer An MCB circuit breaker works by automatically interrupting the flow of electrici...
Date:2026-04-17
Why Is Short-Circuit Coordination Important in a Motor Starter?
A motor starter does more than switch a motor on and off. It must also protect the motor circuit when...
Date: 2026/06/11
Circuit Breaker vs Contactor vs Overload Relay: What Is the Difference?
Quick Answer A circuit breaker, contactor, and overload relay are often installed together in a motor control circuit, but they...
Date: 2026/06/09
What Wire Size Mistakes Can Make a 60 Amp Breaker Unsafe?
Quick Answer A 60 amp breaker wire size should not be selected from the breaker rating alone. Although 6 AWG copper...
Date: 2026/06/08
What Is the Purpose of a Miniature Circuit Breaker in a Low-Voltage Electrical System?
Quick Answer The main purpose of a Miniature Circuit Breaker is to protect low-voltage electrical wiring and circuits against excessive current...
Date: 2026/06/05
Why Is MCB Protection Not Only About Rated Current?
Quick Answer MCB protection is not only about rated current because an MCB must protect the whole circuit, not just...
Date: 2026/06/03